Anker SOLIX Solarbank MAX AC BP7000 | 7000 Wh

Anker SOLIX BP7000 – 7 kWh expansion battery for the Solarbank MAX AC

The Anker SOLIX BP7000 expands your Solarbank MAX AC with an additional 7 kWh of storage capacity. This allows you to store even more of your self-generated solar power and reliably cover high-consumption evenings, nights, and larger households – for maximum self-consumption and greater independence from the grid.

Simply stackable – modular up to 42 kWh

The BP7000 is stacked directly onto the Solarbank MAX AC. With up to five expansion batteries, you can expand your system step-by-step from 7 kWh to up to 42 kWh – even later and without a complete reconstruction. Each unit increases the system height by approximately 275 mm.

Important note: Expansion battery, not an independent storage system

The BP7000 is a pure battery module without its own inverter and requires an Anker SOLIX Solarbank MAX AC as a base. For full system peak performance, Anker recommends operation with at least one expansion battery.

Same safety & durability as the MAX AC

• LiFePO4 cells, up to 10,000 charge cycles, designed for approximately 15 years
• 10-year warranty
• IP66 protection class, C5-M corrosion protection, operation from −20 °C to +55 °C
• Suitable for garage, basement, or outdoor areas

When is the expansion worth it?

Whenever your 7 kWh are no longer sufficient – for example, with a heat pump, electric car, or high evening consumption. More capacity means that less solar power flows unused into the grid and you consume a larger share yourself.

Frequently Asked Questions

Can I operate the BP7000 on its own?

No. It is an expansion battery without its own inverter and requires a Solarbank MAX AC as a base.

How many expansion batteries can I connect?

Up to five – this allows you to expand the capacity from 7 kWh to up to 42 kWh.

Do I have to re-wire when expanding?

No. The battery is simply stacked onto the MAX AC and integrated into the system.